Sign In | Join Free | My
Changzhou Chuangwei Motor & Electric Apparatus Co., Ltd.
Changzhou Chuangwei Motor & Electric Apparatus Co., Ltd. Continually bring forwarder new products with high quality to the market!
Home > Analog Stepper Motor Driver >

Microstepping CNC Hybrid Stepper Motor Driver For Engraving Machine 20 ~ 60V

Changzhou Chuangwei Motor & Electric Apparatus Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Changzhou Chuangwei Motor & Electric Apparatus Co., Ltd.
City: Changzhou
Province/State: Jiangsu
Country/Region: China
Tel: 86-519-88381518

Microstepping CNC Hybrid Stepper Motor Driver For Engraving Machine 20 ~ 60V

Model Number : CW250
Place of Origin : Jingsu,China
Brand Name : CW
Certification : CE,ISO9001,ROHS,SGS
MOQ : 1piece
Price : Negotiation
Packaging Details : Export carton and pallet
Delivery Time : 7-25days
Payment Terms : TT,L/C,Paypal
Supply Ability : 200,000sets/month
Model NO : CW250
Number of Stator : two phase
Function : Control
Dimension : 118*75*34mm
Structure : Open-loop
Signal : Continuous
Contact Now

20 ~ 60V Hybrid Stepper Motor Driver With Overheated Protection

The CW250 is a new generation digital 2-phase stepper motor driver, based on a 32-bit DSP processor, combination of the anti-resonance, low noise, micro-step and low temperature rise technology significantly improve the performance of the stepper motor, has low noise, small vibration, low temperature rise and high-speed torque. The driver use online adaptive PID technology, without manual adjustment can be automatically generated optimal parameters for different motors, and achieve the best performance.
Supply voltage range from 20VDC to 60VDC, suitable for driving various 2-phase hybrid stepping motors which phase current below 5A. The micro-step can be set from full step to 51200steps/rev and the output current can be set from 1.2A to 5.0A; with automatic idle-current reduction, self-test, over-voltage, under-voltage and over-current protection.

  • High-performance, low price
  • micro-step
  • Automatic idle-current reduction

l Optical isolating signal I/O

l Max response frequency up to 75Kpps

  • Low temperature rise, smooth motion
  • Online adaptive PID technology

Suitable for a variety of large-scale automation equipments and instruments. For example: labeling machine, cutting machine, packaging machine, plotter, engraving machine, CNC machine tools and so on. It always performs well when applied for equipment which requires for low-vibration, low-noise, high-precision and high-velocity.

Electrical Specifications

Input Voltage(DC)20-60VDC
Output current0-5.0A
Pulse Signal Frequency0-75KHZ
Input Signal Current71016mA

2.Current and micro-step Setting
Current setting


Standstill Current Setting
SW4 is used for standstill current setting. OFF means that the standstill current is half of the dynamic current; and ON means that standstill current is the same as the selected dynamic current. Usually the SW4 is set to OFF, in order to reduce the heat of the motor and driver.
Micro-step Setting
The segment for CW250 is fixed to 8.
Control signal Connector

Control Signal connector
PUL+Pulse signal positive
PUL-Pulse signal negative
DIR+Direction signal positive
DIR-Direction signal negative
ENA+Enable signal positive, usually left unconnected(enable)
ENA-Enable signal negative, usually left unconnected(enable)

Power and Motor Connector

GNDPower Ground
+VDCPower supply, +20~+60 VDC
A+Motor phase A
B+Motor phase B

Control Signal Connector Interface

Figure1: Common-Cathode

Figure2: Common-Anode

Figure 3: Typical connection



4. Problems and Solutions

problemsPossible causesolutions
Motor is not rotatingNo power supplyCheck the power supply
No control signalCheck the control signal
The driver is disabledDon’t connected the enable signal or enable the driver
ALM lightsSupply voltage is too high or too lowCheck the supply voltage
Motor line short-circuitCheck motor lines eliminate the short-circuit
Motor line wrong connectCheck the motor wiring
Motor or drive failureReplace the motor or drive
Motor rotates in the wrong directionMotor phases connected in reverseReverse the phases line
Motor line breakChange the phases are connected
Inaccurate PositionThe Micro steps set incorrectly.Set the correct segments
The motor load is too heavy.Increasing the current
Control signal is interferedEliminate interference
Motor StalledPower supply voltage too lowIncreasing the supply voltage
Accelerating time is too short.Extend the acceleration time
Current setting is too smallIncreasing the current
Motor torque is too smallReplace the motor

5. Mechanical Specifications (unit: mm(inch),1 inch = 25.4mm)

Product Tags:

stepper motor controller


bipolar stepper motor driver

China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

Microstepping CNC Hybrid Stepper Motor Driver For Engraving Machine 20 ~ 60V Images

Inquiry Cart 0
Send your message to this supplier
Enter your email please.
To: Changzhou Chuangwei Motor & Electric Apparatus Co., Ltd.
Characters Remaining: (0/3000)